How to Get Out of Safe Mode in Windows 10:-
This article will discuss how to exit safe mode in Windows 10. You can exit Safe Mode by manually restarting your PC from the desktop or using the Windows Command Prompt. However, without any knowledge of how it works, you may find it a bit complicated. Getting out of safe mode depends on how you got into it in the first place.
This
guide will walk you through everything you need to do to get into Windows 10 in
safe mode.
How
to Bring your Computer Out of Safe Mode on Windows 10:-
Exiting
Safe Mode depends on how you entered it, but should be a simple restart of your
PC from the Start menu or Lock screen. To do this, check the Windows 10
Bluetooth driver as well.
1.
Open the Start menu by pressing the Windows key on your keyboard or clicking
the Windows icon in the lower-left corner of the screen.
2.
Select the Power button just above the search bar
3.
Click Restart from the options.
1.
Alternatively, if you're stuck on the lock screen and can't access the desktop,
click the Power button in the bottom-right corner
2.
Finally, click Restart to reboot your device.
Windows
10 Safe Mode off with System Configuration Utility:-
The
simple reboot method in the previous section should work in most cases.
However, safe mode may still boot after your system restarts. This usually
happens if you enter safe mode through the msconfig tool or change some
settings in the system configuration utility, especially one that configures
your PC to always boot into safe mode.
1. Press Windows key + R on your PC to launch
Run dialog box.
2. Input
msconfig in the text box provided and press enter on your keyboard.
1. In the
System Configuration window, switch to the Boot tab.
2. Navigate
to Secure Boot and uncheck it.
1. Click OK
to save the changes
2. If you
see a prompt to restart your PC later, follow it to boot your PC normally.
3.
Otherwise, reboot manually from the Start menu.
How
to Turn off Safe Mode with CMD:-
Now,
this is where things get a little more complicated. If you enter safe mode from
the command prompt, exiting it from the same command prompt may not work
immediately, but there is a workaround. Also see Free Audio Editing Software.
However,
you may want to use the Ctrl + Alt + Del keyboard shortcut first to restart. If
that doesn't work, proceed to Command Prompt using the steps below.
Press
Windows key + R to launch the Run dialog.
Type
cmd in the text box provided and then press enter on your keyboard to unlock
the command prompt.
Note:
On some PCs, it's best to boot into a command prompt in an administrative mode
to help this method work. To do this, type cmd in the Run text box and then
press Ctrl + Shift + Enter on your keyboard.
1.
Type the following command in the command prompt box.
2.
Press Enter on your keyboard to submit the input.
Windows
should reboot and automatically boot into normal mode. However, if you are
thrown into safe mode again, skip to the next section.
Why
is my Computer Stuck in Safe Mode:-
If
you still get back into Safe Mode after trying the above methods, you can enter
it by enabling Alternative Shell in System Configuration Utility. Presumably,
you can access it using the credit command from the Windows installation disk.
However,
the restart command at the command prompt doesn't cut it. Do the following
instead:
Open
Command Prompt again using the steps in the previous sections.
Enter
the following command.
Press
Enter on your keyboard and you will see a message that says 'Completed
successfully'.
Press
Ctrl + Alt + Del to restart your PC.
Windows
10: Disable Safe Mode with Logging In:-
Forgetting
your password while stuck in safe mode is not a good experience for anyone,
primarily because everything you need to get out of it can only be accessed
from the desktop. However, with a Windows 10 installation disc at your
disposal, you can turn it off in no time.
If
you don't have it, you can complete it with Microsoft's Media Creation Tool.
Also, use the following steps to disable Safe Mode without logging into Windows
10:
Insert
the Windows 10 building disc into your PC while on the lock screen.
Press
the Power icon and then press the Restart option
When
the PC restarts and the screen comes up, press the BIOS key repeatedly to enter
the BIOS menu.
Note:
The BIOS key for most PC models is mostly F2, but you can search for your PC
using the following search keywords 'BIOS key for HP X360' in your favorite
search engine. For example, 'BIOS key for HP X360'.
Conclusion:-
Hopefully
through this post I have brought you the How to Get out of Safe Mode in Windows
10. If you are looking for the site I am here for you to visit you will find it
on my site. But you have to remember one thing and stay away from some
websites. And if you know anything then you can comment below and we try to
answer your question as soon as possible.
Comments